Filter
Top Products
21
Hookups and Settings
You can change programme positions of the
recorder using the number buttons.
Example: for channel 50
Press “5,” “0,” then press .
Step 5: Easy Setup
Make the basic adjustments by following the
on-screen instructions in “Easy Setup.”
Be careful not to disconnect the cables or
exit the “Easy Setup” function during this
procedure.
1 Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the
recorder appears on your TV screen.
2 Follow the on-screen instructions to
make each setting, and press or
, to proceed.
Area
Select your area using M/m.
Auto Channel Setting (page 69)
1 Select a channel type to scan using
</,, and press m.
“All”: Scans both digital and
analogue channels.
“Digital”: Scans only digital
channels.
“Analog”: Scans only analogue
channels.
2 Select “Start,” and press .
The recorder starts scanning the
programme positions.
Changing programme
positions of the recorder using
the remote
[/1
</M/m/,,
O
RETURN
TV [/1
,continued