Filter
Top Products
73
Settings and Adjustments
Displays the registration code of DivX video
files for this recorder.
ABOUT DIVX VIDEO-ON-DEMAND:
This DivX Certified
®
device must be
registered in order to play DivX Video-on-
Demand (VOD) content. Go to
vod.divx.com
with this code to complete the
registration process and learn more about
DivX VOD.
You can check the software version.
Changes the Command Mode of the
recorder to avoid interference with your
other Sony DVD recorder or player.
1 Select a Command Mode (“1,” “2,” or
“3 (Default setting)”), and press .
2 Set the Command Mode for the remote
so it matches the Command Mode for
the recorder you set above.
Follow the steps below to set the
Command Mode on the remote.
1 Hold down .
2 While holding down , enter the
Command Mode code number using
the number buttons.
3 Hold down both the number and
buttons at the same time for more
than three seconds.
Recorder Settings
(System 2)
You can check the current software version
of the built-in digital tuner and keep it up to
date with the latest software.
b
Do not turn off the recorder during updating the
software.
Resets the date and time for One-Touch
Dubbing from HDD camcorder. The
recorder will dub all of the contents on the
HDD camcorder next time you press the
ONE-TOUCH DUB button. The display
asks for confirmation.
DivX
®
Registration
Version
Command Mode
b
The default command mode setting for this
recorder and the supplied remote is “3.”
The remote does not function if different
command modes are set for the recorder and
remote. Set the same command mode.
You can check the Command Mode for the
recorder in the front panel display (page 11).
Software Update
Auto Updates the software
automatically. Normally,
select this position.
Off Does not update the
software automatically.
Start Updates the software
manually.
One-Touch Dubbing reset
Auto Finalisation
On When you remove a disc
from the recorder, the
recorder automatically
finalises the disc.
Off Turns off the function.
,continued