Filter
Top Products
13
Hookups and Settings
Step 2: Connecting the Video Cords
Select one of the following patterns, A through D , according to the input jack on your TV
monitor, projector, or AV amplifier (receiver). This will enable you to view pictures.
A SCART input jack
When you set “Easy Setup - Line1 Output” to
“S Video” or “RGB” (page 20), use a
SCART cord that conforms to the selected
signal.
B Video input jack
You will enjoy standard quality images.
C S VIDEO input jack
You will enjoy high quality images.
D Component video input jacks (Y, PB/CB,
P
R/CR)
You will enjoy accurate colour reproduction
and high quality images.
If your TV accepts progressive 525p/625p
format signals, you must use this connection
and set “Component Out” in the “Video”
setup to “On” (page 87). Then set
“Progressive Output” to “On” in the “Video”
setup to send progressive video signals. For
details, see “Progressive Output” on page 87.
VIDEO
AUDIO
INPUT
L
R
INPUT
S VIDEO
PR/CR
PB/CB
Y
COMPONENT
VIDEO IN
C
B
D
A
Audio/video cord
(not supplied)
Component
video cord
(not supplied)
(yellow)
TV, projector, or AV
amplifier (receiver)
TV, projector, or AV
amplifier (receiver)
(red)
S-video cord
(not supplied)
TV, projector, or AV
amplifier (receiver)
(green)(blue)
(green)
(blue)
(red)
: Signal flow
to
COMPONENT
VIDEO OUT
to LINE 2 OUT (VIDEO)
to LINE 2 OUT (S VIDEO)
SCART cord
(not supplied)
to i LINE 1 – TV
DVD recorder
TV
,continued