Filter
Top Products
65
Erasing and Editing
3 Press ENTER if point A is correct.
If point A is incorrect, select point A
using c/C, and press ENTER. The
display for setting point B appears.
4 Select point B using m/M, and
press ENTER.
Playback pauses.
5 Press ENTER if point B is correct.
If point B is incorrect, select point B
using c/C, and press ENTER. The
display asks for confirmation.
• To reset point A, press M and
O RETURN, and go to step 2.
• To reset point B, press M and repeat
step 4.
• To preview the title without scenes to
be erased, select “Preview” (except for
DVD+RWs).
6 Select “OK,” and press ENTER.
The scene is erased. The display for
setting point A appears.
• To continue, go to step 2.
• To finish, select “Quit.”
z Hint
A chapter mark is inserted after the scene was
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
b Notes
• Images or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
• For DVD+RWs, the erased section may be
slightly different from the points you selected.
If you want to dub a long title to a disc but do
not want to reduce the picture quality, divide
the title into two shorter titles. Note that
dividing a title cannot be undone.
* Only playlist titles can be divided for DVD-RWs/
DVD-Rs (VR mode).
1 Press TITLE LIST.
Press </, to switch the Title Lists, if
necessary.
2 Select a title, and press ENTER.
The sub-menu appears.
3 Select “Divide,” and press ENTER.
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title,
press X and then press ..
4 Select the dividing point by pressing
m/M, and press ENTER.
Playback pauses.
5 Press ENTER if the dividing point is
correct.
If the dividing point is incorrect, select
the dividing point using c/C, and
press ENTER. The display asks for
confirmation.
• To change the dividing point, press
M.
6 Select “OK,” and press ENTER.
The title is divided in two.
z Hint
After a title is divided, the title name prior to
division is assigned to both the first and second
parts.
Dividing a title (Divide)
-
RWVR
HDD
-
RVR
**
,continued