Filter
Top Products
42
Timer Recording
(Standard/VIDEO Plus+)
You can set the timer for a total of 40
programmes (8 programmes when using the
PDC/VPS function), up to 30 days in
advance.
There are two methods to set the timer: the
standard method and VIDEO Plus+ (RDR-
HX520/HX720 only) method.
• Standard: Set the date, time, and
programme position of the programme
manually.
• VIDEO Plus+ (RDR-HX520/HX720 only):
Enter the PlusCode programming number
designated for each TV programme
(page 44).
1 Press TIMER.
2 Press M/m to select the “Day and
Time” or “Mode” row. Then press
ENTER.
3 Select an item using </, and
adjust using M/m. Then press ENTER.
To make additional changes to items in
different rows, return to step 2. The
adjustable items are listed below.
“Day and Time”:
Sets the date, start time, and stop time,
and selects the programme position or
input source.
The date item changes as follows:
Today y …… y Sat 28.10 (30 days
later) y Sun (every Sunday) y ……
y Sat (every Saturday) y Mon - Fri
(Monday to Friday) y Mon - Sat
(Monday to Saturday) y Daily y
Today
“Mode”:
Selects the recording mode (page 40).
“Media”:
Selects the media, HDD or DVD.
“PDC/VPS”:
Sets the PDC/VPS function. See “About
the PDC/VPS function” below.
“Extend Time”:
Sets the duration in increments of 10
minutes, for a maximum of 60 minutes
when a timer recording is in progress. If
the programme set to be recorded daily or
weekly is extended, the manually
extended time set here will be added to
the subsequent timer recording times.
Note that when “PDC/VPS” is set to
“On,” you cannot make the “Extend
Time” setting.
• If you make a mistake, select the item
and change the setting.
Setting the timer manually
(Standard)
+
RW
-
RWVR
-
RW
Video
-
RVR
+
R
HDD
-
R
Video
</M/m/,,
ENTER
TIMER
x REC
STOP
OPTIONS