Filter
Top Products
C:\2886042111HXD860CEK\01GB-
HXD860CEK\070REC.fm
master page=left
specdef 20060621
RDR-HXD860
2-886-042-11(1)
56
“Info”:
Displays the timer setting information
box along with the disc space required to
record the whole programme (according
to the selected recording mode).
Press O RETURN to return to the
Timer List.
To change or cancel the setting, repeat
steps 3 and 4 above.
When the timer settings overlap
The programme set last has priority.
Example: You set the timer in order of A, B,
and C (setting C has first priority)
If the end time of one recording and the
start time of another are the same
The end of programme A will be cut off.
To scroll the list display by page (Page
mode)
Press / while the list display is turned
on. Each time you press
/ , the entire
Timer List changes to the next/previous page
of timer settings.
To turn off the Timer List
Press O RETURN.
z Hint
For manual timer settings, you cannot modify the
timer setting for the current recording, but you can
extend the duration of the recording time while
recording (page 48).
For timer settings using the EPG, you can modify
the timer setting for the current recording while
recording, but you cannot extend the duration of the
recording (even when recording is stopped).
b Notes
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “ ” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
Auto Title Erase (HDD only)
If there is not enough space for a timer
recording, the recorder automatically erases
old titles recorded on the HDD. The oldest,
played title is erased. Set “Auto Title Erase”
of the “Timer Settings” to “On” in the
“Recording” setup (page 100). Protected
titles are not erased.
will be cut off
Actual recording