Filter
Top Products
49
“COPY” appears on the Mode
Display key.
In this case, “DVD c c VCR” flashes
on the Label keys and moving finishes
with a beep sound. And the keys for
VCR appears.
6 Press COMMANDER OFF.
If you keep COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.
To return to the original setting
Follow steps in “To clear all signals
learned for a specific component,” page
26.
COMMANDER
OFF
Programming a
Frequently Used Key
Operation for SYSTEM
CONTROL Buttons or
Label Keys
In addition to their original System
Control functions (see page 31), SYSTEM
CONTROL 1, 2 or 3 buttons or SYSTEM 4
- 15 Label keys can be programmed to
“learn” any remote control signal.
As they operate independently from
other buttons, SYSTEM CONTROL 1, 2
or 3 buttons can work as one-touch
buttons without any preceding operation
such as pressing a Component Select
button to select a component.
This is useful if you prefer having the
SYSTEM CONTROL button as a “one-
touch” button for a single operation
rather than executing a series of
commands.
Note
Some specific remote control signals may not
be learned. Refer to the operating instructions
supplied to the specific remote control as well.
MENU EXIT
COMMANDER
OFF
MORE321
TV STB VCR DVD CD AMP
OTHER
TIMER
SYSTEM CONTROL
OK
4
6
2
3
PROGRAM
Continued