Filter
Top Products
27
GB
Setting the beep
The Remote Commander is preset at the factory with the
confirmation beep set to on. You can change the setting
to turn off the beep.
1 While pressing the (light) button, press
the OTHER button.
“SET MODE” appears as the screen title.
2 Press the V/v buttons to select “5 UNIT
SETTINGS”, then press the OK button or
the centre Label select button.
“UNIT SETTINGS” appears as the screen title.
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
3 Press the V/v buttons to select “7 BEEP
SOUND”, then press the OK button or the
centre Label select button.
“BEEP SOUND” appears as the screen title, and the
current setting is shown inside the [ ].
Tip
If a number is displayed before the menu, you can select the
menu by pressing the number button.
4 Press the B/b buttons or the left or right
Label select button.
Each time the setting changes, a beep sounds and [ ]
moves to the new setting.
ON: Turns on the beep.
OFF: Turns off the beep.
5
Press the (light) button or the RETURN
button three times.
The set mode closes, and the Remote Commander
returns to standby for operating the A/V components.
Note
When making settings, a beep sounds even if the button beep is
set to off.