Filter
Top Products
82
Notes
• The player can store the settings of up to 50 discs.
When you store the setting of disc number 51, the
first disc setting is canceled.
• The Playback Memory function cannot be used for
DVD-RWs in VR mode.
• During playback, do not turn off the player by
pressing POWER on the player. Doing so may
cancel the settings. When you turn off the player,
press x first to stop playback and then press [/1 on
the remote. After the power indicator lights up in red
and the player enters standby mode, press POWER
on the player.
xTRACK SELECTION (DVD VIDEO
only)
Gives the sound track which contains the
highest number of channels priority when
you play a DVD on which multiple audio
formats (PCM, DTS or Dolby Digital format)
are recorded.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 78).
• If PCM, DTS and Dolby Digital sound tracks have
the same number of channels, the player selects
PCM, DTS and Dolby Digital sound tracks in this
order.
xCD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. The setting will be
activated when you press DISC SKIP.
This function affects the output of the
following jacks:
–LINE OUT L/R (AUDIO) 1/2 jacks
–5.1CH OUTPUT jacks
–PHONES jack
Note
If you select “ON” when playing CD type DTS discs,
the sound will become noisy.
OFF No priority given.
AUTO Priority given.
OFF Select this when playing CD
discs, including CD type DTS
discs.
ON Eliminates the use of
unnecessary circuits needed to
play CDs.