Filter
Top Products
35
US
Technical Features
Controlling the volume
Using the display’s speakers or headphones, you can listen to
sound from your computer or other equipment connected to the
display’s audio input jacks.
You can control the volume by inputting either PC 1/PC 2 or TV/
COMPONENT/VIDEO 1/VIDEO 2.
You can control the volume by using the “Volume” adjustment
bar.
1 Press the VOL+/– buttons when there is no menu
displayed on the screen.
2 Press the VOL+/– buttons to set the desired volume
level.
The bar automatically disappears after about 5 seconds.
Notes
• You cannot adjust the volume using the M/m buttons on the display
when the main menu is displayed on the screen. Use the VOL +/–
buttons on the remote control instead.
• You cannot adjust the volume using the M/m buttons on the remote
control.
• When your display is in power saving mode, no sound comes from the
speakers or the headphones.
Power saving function
If the display is connected to a computer or video graphics board
that is DPMS (Display Power Management Standard) for Analog
input/DMPM (DVI Digital Monitor Power management) for
Digital input compliant, the display will automatically reduce
power consumption as shown below.
* When your computer enters the “active off” mode, the input signal is
cut and “No Input Signal” appears on the screen. After 5 seconds, the
display enters the power saving mode.
** “Deep sleep” is a power saving mode defined by the Environmental
Protection Agency.
Tip
When the display is in the standby mode or the Sleep timer is activated,
the 1 (power) indicator lights up in red.
Volume 30
,
Power mode Power consumption 1 (power)
indicator
normal
operation
99 W (max.) green
active off*
(deep sleep)**
2 W (max.) orange