Filter
Top Products
15
9 Limiter characteristics graph
Displays the characteristics of the output limiter.
You can control the threshold of the output limiter by dragging
the marker on the graph with the mouse.
The reference level is 0 dB.
0 Output channel select button
You can select the output channel for which you want to
enable the AUTOMATIC MIXER.
The button of the selected channel lights in green.
qa Limiter setup
Sets the parameters of the output limiter.
The output limiter operates by detecting the sound signal after
passing through the delay circuit.
• THRESHOLD : Sets the threshold. The adjustment range is
0 to +20 dB in 1-dB steps.
• ATTACK : Sets the attack time. The adjustment range
is 0.1 to 1000 ms in 24 steps.
• RELEASE : Sets the release time. The adjustment range
is 10 to 10000 ms in 18 steps.
qs AUTOMATIC MIXER ON button
Turns on and off the AUTOMATIC MIXER.
It lights in green when pressed ON.
qd DEFAULT / EDIT select button
You can select either the default parameters or the parameters
set for the user on this screen, for the AUTOMATIC MIXER.
The selected mode lights in yellow.
If you select DEFAULT, you cannot change each parameter.
qf EXIT button
Closes the AUTOMATIC MIXER SETUP screen and returns
to the ROUTING screen.