Sony SRP-X700P Universal Remote User Manual


 
3
Features
The CD-ROM supplied with the SRP-X700P contains two
applications and the driver software.
By installing the software in a personal computer running
Windows, you can set the parameters of the SRP-X700P and can
perform from the PC the basic operations of the SRP-X700P.
Similarly, you can also operate a Sony DVD, VCR, CD/MD and
the like that is connected to the SRP-X700P.
SRP-X700P Manager
The SRP-X700P Manager enables you to set all the functions of
the SRP-X700P.
You can set all functions of the SRP-X700P including making
various settings in accordance with the operating environment and
peripheral equipment, can use of a maximum of 20 scene
memories, can save the setup files, and so forth.
User Control Panel
From the User Control Panel, you can control the basic operations
(sound volume adjustment, input selection and scene recall) of the
SRP-X700P and also the basic operations (playback, stop, fast
forward, rewind, etc.) of other Sony products (DVD, VCR, CD/
MD) connected to the SRP-X700P, all from a personal computer.
Precautions
The recommended operating environment for using this software
is as follows.
Operating systems:
Microsoft
®
Windows
®
98 Second Edition
Microsoft
®
Windows
®
Millennium Edition
Microsoft
®
Windows
®
2000 Professional
Microsoft
®
Windows
®
XP Professional *
Microsoft
®
Windows
®
XP Home Edition *
Operation of this software when the OS has been upgraded is not
guaranteed.
* Simple switching of desktop and user cannot be implemented.
CPU: Celeron 400 MHz or higher
Memory: 128 MB or more
Hard disk free space: 10 MB or more
USB terminal should be equipped as standard.
This software may not operate appropriately depending on the
USB equipment and hub used simultaneously by your computer.
Be sure to use the USB equipment and hub conforming to the
USB 2.0 standard.
Operation this software is not guaranteed in every personal
computer, even if the recommended environment is satisfied.
Use the USB cable conforming to USB 2.0 to connect to the
SRP-X700P. If any cable other than the USB cable conforming
to USB 2.0 is used, the software may not work properly.
While you are using the SRP-X700P Manager and the User
Control Panel, your computer must not enter the System
Standby or System Hibernate state. Therefore, be sure to
select “Power Options” from the “Control Panel” and select
“Never” in the System Standby tab and in the System
Hibernate tab.
If your computer enters the System Standby or System Hibernate
state while the SRP-X700P Digital Powered Mixer is connected
and these software are in use, communication between them will
be interrupted and the software must be started again.
The specifications of this software are subject to change without
notice due to improvement.
The actual screens of the application software may appear
differently from those printed in these Operating Instructions.
This manual describes operations of the SRP-X700P when it is
used via a personal computer.
Section 1 describes how to set the parameters using the
SRP-X700P Manager. Section 2 describes how to operate the
SRP-X700P from the User Control Panel and Sony products
connected to the SRP-X700P. Read this manual together with the
Operating Instructions of the respective Sony products.
About This Manual