Filter
Top Products
34
GB
Precautions for using Drag’n Drop CD+DVD software
• Close all other CD or DVD writing software before using Drag’n Drop
CD+DVD software to write data.
• The boxes of the Drag’n Drop CD+DVD software become transparent
and can no longer be seen after a DVD or CD is ejected from this drive,
or when a certain amount of time elapses. To always display the boxes,
right-click
in the taskbar and add a check to [Shows Boxes].
• When using Drag’n Drop CD+DVD software to write data, you cannot
use DVD+R, DVD+RW, DVD-R, DVD-RW, CD-R, or CD-RW discs
preformatted with packet writing software such as DirectCD
®
(including
commercially available preformatted discs). However, it is possible to
use preformatted DVD+RW, DVD-RW, and CD-RW discs by deleting
the format with the “Erase RW disc...” function in Drag’n Drop
CD+DVD software. To use this function, right-click one of the “Drag’n
Drop CD+DVD” boxes, and select “Erase RW disc...” from the menu
that appears.
• When backing up rewritable DVD media, it is recommended that you use
the same type of DVD media as the original disk. For details, refer to the
Drag’n Drop CD+DVD online help or the website.
• To play music CDs created on CD-R or CD-RW disc, the playback
equipment must support these types of media.
• It may be illegal to make copies of data, video, or audio whose copyright
you do not own or for which you have not received permission from the
copyright holder.
Bit rate Approximate maximum recording time
4 Mbps About 120 minutes
6 Mbps About 90 minutes
8 Mbps About 60 minutes
• When you want to use Click to DVD software on a PCG-C1MW, PCG-
C1MHP, or PCG-C1MHP computer to record video from digital video
(DV) device through an i.LINK or other type of cable, make sure that
you change the PowerPanel
®
profile to “DV” as follows before
proceeding with recording.
1 Right-click in the notification area of the Windows taskbar.
2 On the shortcut menu that appears, point to “Profile”, then click “DV”.
You can now record video from a DV device.
z Hint
When you are done recording video from a DV device, return the Power
Panel profile to its original setting.