Filter
Top Products
Synology DS-101j
9. Tighten the last two screws on the back of the side cover to finish the HDD
installation.
Warning: Please do not have AC adapter connected to the
power when installing the HDD during above steps.
10. Connect the AC adapter and the LAN cable to the DS-101j. Press the power
button, and the POWER LED will flash while processing a self-test for about 40
seconds. You will hear a beep sound after the DS-101j completes the self-test, and
then the POWER LED becomes still.
Warning: Do not lay the DS-101j Disk Station horizontally or
block the ventilation slots on the covers.
15