Filter
Top Products
Synology DS-101j
Chapter 2 Install your DS-101j Disk Station
2.1 Synology DS-101j Disk Station External Components
Front Panel
A. LED meanings
POWER LED –
The POWER LED light will blink
when turning on and shutting down the
DS-101j Disk Station. It will remain lit
up while the machine is powered on.
STATUS LED –
The STATUS LED shows the internal
hard drive’s status. When the internal
hard drive is below 85% of it’s
capacity, the STATUS LED will light
up in green; when the drive exceeds
85% but has not yet reached 95% of
it’s capacity, the STATUS LED will
light up in orange; when the drive
exceeds 95% of it’s capacity, the
STATUS LED will blink in orange.
HDD LED –
The HDD LED lights up when the
internal hard drive is working or
operating. Periodically, the HDD LED
will blink. The frequency depends on
the internal hard drive’s activity.
LAN LED –
The LAN LED lights up when the
LAN cable plugs in. The LAN LED blinks periodically, indicating that the
network is working.
B. Power button
The Power button is used to turn the machine on or off. It will take approximately
30 seconds to a full minute to turn on DS-101j Disk Station. To turn the machine
off, press the Power button and hold for 4 seconds until the Power LED begins
blinking and you can hear a beep. Then the shutdown process will complete in 30
seconds.
23