Filter
Top Products
Section 10.1 - Menu groups
10-2
Menu group 1
Menu group 2
Menu item Parameter(s) Values Reference
GPI Setup
Polarity
Width
open, close
000
through 990 ms (in 10ms steps)
9.2.1, “Setting up
GPI devices”
Event
GPI Event Number 1 through 10
GPI “channel” 1through 5
00
(off) through 99
9.2.2, “Setting the
trigger points”
Pre-roll
Post-roll
Minutes and
seconds
Pre-roll time: 00min05sec through
59min59sec
Post-roll time: 00min03sec through
59min59sec
6.7.5, “Setting pre-
roll and post-roll
times”
Crossfade Time
Milliseconds 10ms through 200ms in 10ms steps
10ms through 90ms in 10ms steps
6.7.6, “Crossfade
times”
Dither
Type of dither or
on and off
off, Rectangular (=on),
Triangular
7.2.11, “Dither”
Rec Mute
Track muting on or off for each track 7.1.3, “Rec Mute
function”
Menu item Parameter(s) Values Reference
Shuttle Mute
Enabled off or on 5.2.4, “Shuttle mut-
ing”
TDIF Word Length
Length in bits,
of incoming
data
16 bit, 20 bit, 24 bit 7.2.10, “Word
length”
Analog In/Out
Reference Level
Reference level,
in dB
-16dB, -18dB, -20dB 7.2.13, “Reference
levels”
Level Meter Mode
Hold time
Release rate
0 through 9 seconds, or Continue
(default is 1)
Slow, Fast or Medium
7.2.14, “Meter
modes”
Sine Oscillator
Enabled off, 440 Hz, 1 k Hz 7.2.15, “Sine oscilla-
tor”
G P I S e t u p X - f a d e
E v e n t D i t h e r
P r e / P o s t R e c M u t e
98
38 88
98
38
98
98
S h t l M u t e M e t e r M o d e
W o r d L e n S i n e O s c .
R e f L e v e l
98
38 98
98
98
98