Filter
Top Products
English - 12 -
Active channels
• You can select broadcasts to be listed in the channel
list. To display specic types of broadcast, you
should use Active channel list setting.
• Select Active Channels by using “ ”/“ ” button.
• You can select a broadcast type option from the list
by using “ ”/“ ” button. Available modes are: TV
Only, Radio Only, Text Only, Favourites or Show
All (if available).
• Press the MENU button to save the recent changes
and exit.
Scan Encrypted
• When this setting is on, search process will locate
the encrypted channels as well. If it is set as Off,
encrypted channels will not be located in automatic
search or manual search.
• Use“ ”/“ ” buttons to highlight Scan Encrypted and
press “ ”/“ ” buttons to select YES or NO.
Output Settings
TV Type
• Digital terrestrial television channels can be
broadcast in a widescreen format which must be
output differently to normal and widescreen TV
sets.
• This function defines the screen format of the
connected TV to enable broadcasts’ being displayed
correctly.
• Select 4:3 if you have a standard TV set with 4:3
aspect ratio.
• Select 16:9 if you have a widescreen TV.
• If you select Auto, TV type will be set automatically
according to the broadcast.
Note: This function also enables you to change TV
Type that you have previously selected during the
rst time installation.
TV Out
• The set-top-box can output RGB and CVBS signal
via the TV SCART connector located on the rear
panel.
• Although the RGB format provides a better picture
quality, some devices might not support it.
AC3 Audio
• Highlight the AC3 Audio item by pressing “ ”/“
” buttons. Use the “ ”/“ ” buttons to set the AC3
Audio as On or Off.
• If the channel that you are watching supports AC3
Audio, you can turn this setting on.
SPDIF Delay
You can use this setting when there is an SPDIF
synchronization problem in the received broadcast.
Press the “ ” or “ ” butto to change the delay.
Digital Audio
• Use this setting to dene digital audio out signal type.
• Use “ ” or “ ” buttons to set Digital Audio as
Bitstream or PCM.
• If your selected channel includes compressed sound
stream, you can connect your set-top box to an
external equipment by using digital audio out of your
set-top box for enabling the sound output.
• If you have no external sound equipment, please
select Digital Audio Out as PCM by using “ ” or “
” button.
HDMI Resolution
• This setting enables you to change HDMI resolution
as 576P, 720P, 1080i or 1080P.
• Use “ ”/ “ ” button on the remote control to change
resolution and press GREEN button to apply.
HDMI HDCP
• In the Con guration menu, highlight the HDMI HDCP
item by pressing “ ” or “ ” buttons.
• Use the “ ” or “ ” button to set the HDMI HDCP
as On or Off.