Filter
Top Products
English - 13 -
Receiver Upgrade
• To ensure that your set-top-box always has the most
update information, you can use this setting. In order
for the proper operation, please ensure that the box
is set to standby mode.
• The STB automatically powers up at 3.00 A.M. every
day and searches for any new software that may
be broadcast. If found, the box will download new
software automatically. This operation will normally
take approximately 30 minutes.
• You can enable or disable automatic upgrade by
setting Automatic Scanning option.
• You can manually search for new software by
selecting Scan for upgrade.
• To upgrade software via USB, you can use USB
Upgrade setting.
Parental Settings
• This setting congures parental settings.
• Select Parental Lock option by using “ ”/“ ” buttons.
• Press OK button to enter the menu.
• To display parental lock menu options, PIN number
should be entered. Factory default PIN number is 0000.
After coding the correct PIN number, parental settings
menu will be displayed:
Menu Lock
• Menu lock setting enables or disables the menu
access. You can disable access to the installation
menu or the whole menu system.
Guidance
• When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, the TV will not display the related video-
audio.
Set Pin
• Press OK to display the “Set PIN” window. Use
numeric buttons to enter the new pin number. You
will need to input your new pin a second time for
verication purposes.
• The factory default pin number is 0000. If you change
the pin number make sure you write it down and
keep it safe.
Low Power
If you enable low power option, low power mode will be
activated. In low power mode the power consumption
is less then 1W (in standby).
If you disable low power option the power consumption
will be higher than 1W in standby mode however the
opening time will be shorter.
Audio Description
• Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies.
• The description narrator talks through the
presentation, describing what is happening on the
screen during the natural pauses in the audio (and
sometimes during dialogue, if deemed necessary).
• You can use this feature, only if the broadcaster
supports that additional narration track.
Low Power
If you enable low power option, low power mode will be
activated. In low power mode the power consumption
is less then 1W (in standby).
If you disable low power option, the power consumption
will be higher than 1W in standby mode however the
opening time will be shorter.
Audio Description
This function enables or disables the audio description
feature by pressing the “ ” or “ ” buttons.
Available Langs.
Set available language options (if available)