Filter
Top Products
English - 5 -
Viewing Controls and Connections of the Set-Top-Box
Front Panel
Rear Panel
1. ANTENNA IN : You can connect antenna to aerial input of the box.
2. TV OUT : You can use aerial TV out to connect aerial to your TV.
3. ETHERNET: Use this to connect the box to an active LAN connection.
4. HDMI OUTPUT : You connect the box to your TV’s HDMI input (if
available) by using HDMI connection cable.
5. TV SCART : If your TV has a scart connector, you can connect the
box to your TV using a scart cable.
6. OPTICAL AUDIO : You can use this connector to output the digital
audio to an external device. See your audio system instruction book
for further information.
7. POWER SUPPLY : DC IN (12V) power connection.
Make sure that you connect all cables and connections before you plug the unit into the mains supply. After you
connect the unit to the mains supply, the LED light located on the front panel will be red (Standby mode).