Filter
Top Products
English - 15 -
• Highlight Yes or No by using “ ” or “ ” buttons and
press OK button to conrm.
• If Yes is selected, automatic search starts.
• Selecting No cancels automatic search.
• After the scanning is completed, your set-top-box
will store all the available channels.
Manual Channel Scan
• This feature can be used for direct broadcast entry.
• Select Manual Channel Scan by using “ ” or “ ”
button and press OK button.
• In manual channel scan, the number of the multiplex is
entered manually and only that multiplex is searched for
the channels.
• For each valid channel number, signal level and signal quality
are shown on the screen.
• In both manual and auto search, any existing channel
in the database is not re-stored to avoid duplicates of
that channel.
First Time Installation
• If you want to load default settings of your set-top-
box, you can perform rst time installation.
• Select First Time Installation by using “ ” or “ ”
button and press OK button.
• The following message, asking you whether or not to
delete all channels and settings, will be displayed.
• Highlight No by using “ ” or “ ” button to cancel
installation.
• Highlight Yes by using “ ” or “ ” button and press
OK button to start rst time installation.
• After you select Yes, factory settings will be loaded.
• Installation wizard will guide you through the
installation process. See the section, “First
Time Installation” in previous chapters for more
information on this process.
OSD Warning Messages
• Some warning messages may appear on the screen
indicating that a related function may not be working
properly.
No Signal
• When the box receives no signal (e.g. the antenna
cable is disconnected), “NO SIGNAL” message will
be displayed on the screen.
No Channels Have Been Added Yet
• When there are no channels stored in the box,
Channel List menu will not be displayed and channel
navigation will not be available.
• In such cases, the following error message will be
displayed.
Displaying Text
• Many digital terrestrial television channels broadcast
pages of information on the programmes, the weather,
news and other topics.
• This digital teletext can be displayed by your set-
top-box. Indeed, some channels broadcast teletext
information entirely.
• When such a channel is selected, it will usually display
the opening page of information automatically, after a
short break, .
• Some channels mostly have digital teletext pages
broadcast along with the television programme.
• Press TEXT button to activate digital teletext pages
(if available).
• You can move through the information channels by
using navigation (“ ”/“ ”/“ ”/“ ”), OK and coloured
buttons.
• Press TEXT button again to exit teletext mode.