Filter
Top Products
Installation Series 4060
36 Teledyne Analytical Instruments
Table 3-7: Pin out of 50 pin D-Sub Connector
pin # Description
pin # Description
1
26
2 27
3 + Output 4-20 ma - Channel 2 28 Alarm 1 C Contact
4 - Output 4-20 ma - Channel 2 29
5 + Output 4-20 ma – Channel 1 30
6 - Output 4-20 ma – Channel 1 31
7 - Output 0-1 v (Channel 1) 32 Exhaust Solenoid Hot
8 + Output 0-1 v (Channel 2) 33 Sample Solenoid Hot
9 34 Range 4 Contact/ not used
10 Remote Span + 35 Range 4 Contact/not used
11 36 Alarm 3 NC Contact
12 Remote Span - 37 Alarm 3 NO Contact
13 38 Range 1 Contact
14 39 Range 2 Contact
15 40 Calibration Contact
16 Span Solenoid Return 41 Calibration Contact
17 Span Solenoid Hot 42 Alarm 2 NC Contact
18 Range 3 Contact 43 Alarm 2 NO Contact
19 Range 3 Contact 44 Alarm 2 C Contact
20 Alarm 3 C Contact 45 Alarm 1 NC Contact
21 Range 1 Contact 46 Alarm 1 NO Contact
22 Range 2 Contact 47
23 - Output 0-1 v (Channel 2) 48 Exhaust Solenoid Return
24 + Output 0-1 v (Channel 1) 49
25 50 Sample Solenoid Return
3.3.2.10 RS-232 PORT
The digital signal output is a standard RS-232 serial communications
port used to connect the analyzer to a computer, terminal, or other digital
device. It requires a standard 9-pin D connector.
Input: The input functions using RS-232 that have been implemented
to date are described in Table 3-8.