Filter
Top Products
Operation Series 4060
46 Teledyne Analytical Instruments
4.6.1 Default Parameters
The versatility of this analyzer usually results in significant changes
being made to parameters over the course of time to better suit a
particular application. Occasionally processes change requiring
alteration to alarms, filter settings etc. At some time, it may be
beneficial to reset the analyzer to the default conditions as it was when
shipped from the factory. Below is a listing of the default parameters
used in configuring the typical Model 4060 instrument. Your specific
application may require different settings. Refer to the Addendum and
Testing Results section of Appendix B for any specific changes or
recommendations that apply to your application.
Range/Application: Refer to the Addendum and Testing
Results section of Appendix B
Range: Manual
Alarms: Defeated, 20ppb, 50ppb, HI, NON-
FAILSAFE, NON-LATCHING
Auto Span Timing: Defeated, every 7 days, at 12 hours
Span: 80 ppb
Password: TAI
4.6.2 Style Conventions
The following typeface conventions are used when referring to
screen names, key presses and screen readout:
Screens: Arial 12 pt. type in capital letters.
Example: ANALYZE or MAIN
screen or menu.
Key Presses: <key> The particular keystroke to
enter is placed between < and >.
Example: <enter> or <escape> or
<▲> (UP key) or <▼> (DOWN
key.
Only when the keystroke is to be
entered will it be placed between
the brackets. If discussing a