Filter
Top Products
Operation Series 4060
62 Teledyne Analytical Instruments
instrument off. By entering LOGOUT, you effectively log off the
instrument leaving the system parameters protected until the password is
reentered. The system will continue analysis, however.
To log out:
<UP/DOWN >From the MAIN MENU scroll to field of LOGOUT
function.
<Enter> Press <Enter> to logout
The screen will display the message:
________________________________________________
Restrict Access?
ENTER=Yes ESCAPE=NO
________________________________________________
Pressing <Enter> will logout the current user and protect the system
from unauthorized changes to parameters.
If user has LOGGED OUT, then only the following SUB MENU
procedures may be executed:
1. PASSWORD
2. LOGOUT (which only repeats the logout)
3. MODEL
Note however, that the instrument can still be used for analysis
without entering the password. To defeat security the password must be
entered .
4.6.19 Standby
This function allows you to place the instrument in STANDBY.
CAUTION: STANDBY SHUTS DOWN POWER TO THE DISPLAYS
ONLY. INTERNAL CIRCUITS ARE STILL ENERGIZED
AND ELECTRICAL SHOCK HAZARD STILL EXISTS.
To place the instrument in STANDBY status: