Filter
Top Products
Recording functions
25
EN
EN
7. Recording quality
Select a recording quality from the 4 proposed using the key.
*1 : High, *2 : Normal, *3 : Basic, *4 : Low.
Note: choice of quality enables you to adapt the recording time on the hard disc.The higher the quality the
bigger the space used on the hard disc. Select one of the following options: high, Normal, Basic (base)
or Low.
When empty the hard disc of your DMR can contain around 120 hours of recording for a *4: Low quality
adjustment (20 hours in *1: High).The figure 1 to 4 is displayed in the information banner when playing
the recording.The quality choice is only valid for one particular programming session.
8. VPS/PDC
Activate the VPS/PDC function using the key to trigger recording at the actual time of
the beginning of the broadcast. If the channel broadcasts VPS/PDC signals you can avoid the
consequences of any delays in broadcasting.This adjustment is only valid for this programming
session and for channels received via the aerial (
PR
- -
).
9. Keep
Memorise your programming by selecting Keep with the key and confirming with the
OK
key.
• The Programming screen reappears.Your programming is now displayed in the chronological
list of programming already carried out. On this screen it is only possible to display 5
programming sets from the maximum 16. If you have carried out more than 5
programmings, to see the others press the and key.
Note: to check (or delete) programming parameters, select a
name and press OK.The programming parameters menu
appears. Correct the parameters as shown in steps 1 to 9 or
delete the programming by selecting Delete and confirming
with the OK key.
10. Return to the main menu using the MENU key in order to continue to use your DMR or
turn it off using the
STANDBY/ON key.
DTH7500_en 4/07/03 16:55 Page 25