Filter
Top Products
Recording functions
28
Recording from a connected device
Your DMR allows you to copy TV programmes (satellite or cable) sequences, or video films from
a connected device.
From a satellite receiver or cable receiver
If you haven’t carried out the installation to control the receiver from the DMR (recommended
on page 10), you must select the AV2 socket to which it is connected (check this ).
1. From the Main Menu and with the Channels function selected, press OK.The images of the
last channel watched appear.The information banner is displayed for several seconds.
2. Select the AV2 socket of the DMR using the AV key on the remote control in order to
display AV2 in the information banner and on the display (
LIVE AV2).
3. Record by pressing the REC key on the remote control or RECORD on the front panel.
4. Stop the recording by pressing twice on the STOP key.
From a Camcorder or other device
Your DMR has both RCA Audio-Video and Ushiden sockets for the transfer of video to a
recordable disc.
1. From the Main Menu and with the Channels function selected, press OK.The images of the
last channel watched appear.The information banner is displayed for several seconds.
2. Select the AV3 sockets (on the façade) or AV4 (at the rear) to see the images from the
connected device (S-Video or composite).
3. Place the device in its play mode.
4. Record by pressing the REC key on the remote control or RECORD on the front panel.
5. Stop the recording by pressing twice on the STOP key.
DTH7500_en 4/07/03 16:55 Page 28