Filter
Top Products
Menus
47
EN
EN
Ratings limits
This function makes it possible to restrict viewing of certain DVD discs by programming a
restriction on your DMR.This function can only be used with DVD discs provided with the
function.Your DMR provides ratings limits on a scale of 1 to 8.The Ratings limit function does
not work if the disc being played does not have a rating limit. In Europe ratings limits are as yet
uncommon on DVD discs on sale.
1. From the main menu select the Setup line with the keys, then confirm with OK.
2. With the Parental Control line highlighted, press OK on the remote control (Parental
Control menu is displayed).
3. Press the key to highlight Ratings Limits and press OK.
4. Use the or keys to set the bar at the level desired.
Note: the DMR is supplied without any ratings limit setting. If you
want to prohibit playback of certain discs you will have to set a
ratings limit.
5. Press OK.
6. To return to the DMR menu, press until the menu is displayed on the screen.
Non categorized titles
We often feel that some DVD discs ought to have a
ratings limit. Unfortunately few discs in Europe have one.
You can however restrict viewing of such discs by means
of the Unrated Titles function by ticking the Password
Required, option and then locking the DMR as
described on page 46.When this is done the password
will be requested before playing any DVD disc, including
those that would not normally need a restriction.
Changing the code
To change the code, you must de-activate the Lock function to be able to return afterwards.
1. From the Parental Control menu enter the 4 figure code, then confirm with OK.
2. The Lock line is selected. Press OK.
3. With the keys select Off and confirm with OK.
4. Exit the menu by pressing 3 times on the RETURN key.
5. See steps 1, 2 and 4, 5, 6 to allocate a new password.
6. See the Locking paragraph to enter a new code.
Note: if you forget your secret code, see the Trouble Shooting Guide at the end of this manual (page 53).
DTH7500_en 4/07/03 16:56 Page 47