Filter
Top Products
4
Connections and initial set up
1. Unplug the antenna cable from your TV set and plug it into the ANTENNA-CABLE IN
socket of your DVD recorder.
2. Using the coaxial cable supplied, connect the ANTENNA-CABLE OUT socket of the
DVD recorder to the
g antenna socket of your TV set.
3. Using a Peritel cable (Scart) [not supplied] connect connector AV1 (TV) of the DVD player
to the Peritel (Scart) connector on the television set (labelled AV 1, EXT 1, AUX 1
depending on the brand).
4. Use the mains cable to connect your DVD recorder to a mains socket, by first connecting
the cable to the back of the DVD recorder.
Note: connection to a satellite or cable receiver is detailled on page 14.
For UK, please see safety information regarding the mains plug at the end of this user manual, in the cover
page.
Basic connections
Your DVD recorder has many connection possibilities to allow it to fit into a setup comprising
several devices.We recommend that you follow the connection setup on this page, and then carry
out the adjustments shown on the following pages.You will first need to set up the channels as
explained in the following pages before the final interconnection of the devices, described on
pages 14 to 18.
TV
DVD recorder
220 - 240 V
50 - 60 Hz
United Kingdom
Ireland
Europe
Scart cable
Coaxial Cable
1
2
3
4
2_DTH8060_en.qxd 17/08/05 12:21 Page 4