Filter
Top Products
Menus
64
System Options
The System Options menu in the Setup menu offers you settings to configure certain useful
functions and optimise the performances of your DVD recorder to match those of the devices
connected to it.
1. From the main menu select the Setup line with the keys, then confirm with OK.
2. Select Options system with the keys, then confirm with OK.
3. Select a function with the keys, confirm with OK, adjust and confirm with the
keys and
OK.
Note: the explanation of the various functions of this menu are
detailed below.The associated illustrations show the
corresponding adjustments or functions.
DivX
Selecting Divx displays the authorisation number.
Digital output (audio)
Depending on the amplifier or television (with or without integrated
decoder) connected to your DVD recorder, you will need to set the
DIGITAL AUDIO OUT sockets (coaxial or optical) so that they deliver the
Dolby Digital, DTS or MPEG digital signals supported by the other device.
Tick Dolby Digital or DTS if the amplifier or TV set has a Dolby Digital or
DTS decoder (or both, depending on devices). MPEG must be ticked to play
a DVD disc on which the sound was recorded using MPEG standard.
QSound/Qxpander
This function provides you with virtual reproduction of the multichannel
sound of a Dolby or DTS film onto the two channels of your TV or stereo
amplifier.The sound effects of a 5.1 system are then simulated.
Note
:
The name and logo are registered trademarks of Qsounds Labs Inc.
Laboratories.The TruSuround
®
technology is used under license from SRS
Labs Inc. laboratories.
Your television set
Audio output
connector
2_DTH8060_en.qxd 17/08/05 12:22 Page 64