Filter
Top Products
INSTALLATION (Connection)
15
2) Installing the PVR with one Antenna.
The Connection Type in LNB setting menu
should be set to Loop Through.
Tuner 1 and 2 can receive the RF signal of the
same polarity and the same band.
3) Installing the PVR with Twin LNB Antenna.
The Connection Type in LNB setting menu
should be set to Separated.
4) Installing the PVR with two separated Twin
LNB Antennas and DiSEqC switches.
The Connection Type in LNB setting menu
should be set to Separated.
Connection to the other Satellite Receiver.
Connect the satellite antenna cable to the LNB IN
socket on the PVR. With other connector, connect
the IF OUT socket on the PVR and the LNB IN
socket of the other PVR or STB.
* Remarks
LNB power will not be bypassed from IF OUT to
LNB IN. Only IF signal will be bypassed to IF OUT
from LNB IN.