Filter
Top Products
MENU OPERATIONS
22
automatically by the SCART functionality.
D. TV Aspect Ratio
Select your TV screen format. Select 4:3 or 16:9 mode by using V- , V+ buttons.
E. 16:9 Display Format
If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can
select the display format. Select the Letter Box or Center extract by using V- , V+
buttons.
F. Sound Mode
It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right
mode by using V-,V+ buttons. The Sound mode is configurable later on by using aud
button on your RCU.
G. RF Output
When the STB is connected to the TV by an RF cable, you may need to select the
correct TV standard system. Select the PAL G, PAL I, PAL K, NTSC M mode by using
V- , V+ buttons. The default RF output is NTSC M.
H. RF Channel
Select a RF channel by using V- , V+ buttons. The default RF channel is CH36.
When you change the RF channel number, you must also change to the same value on
the TV. If you do not, there will be no picture and sound.
MediaHighway EPG