Filter
Top Products
MENU OPERATIONS
37
Factory Setting
All the stored data can be reset just like it was manufactured. The factory setting has
two steps. The first is to reset the service data and other system configurations except
Motorized DiSEqC1.2 setting. The second is to reset the parameters of Motorized
DiSEqC 1.2.
Format Hard Disk
To format the HDD in PVR, Press OK button at this Item.
Formatting Hard Disk will delete all the data and the files recorded in HDD permanently.
If a new HDD is installed, it should be formatted because the file structure of PVR is
different from others.
You can not use the Time shifting, Recording and playback functions with an
unformatted HDD.
Transfer Firmware
A. Transfer Program to Other IRD
It is used to transfer PVR firmware to other PVR for upgrading the PVR.
Notes: Please proceed this menu with connecting the PVR of same model and
same specification.
B. Transfer Data to Other IRD
It is used to transfer PVR Data such as service information to other PVR for upgrading
the PVR.