Filter
Top Products
58 Listing Services
value into the Position Index field. If you do not, you have to
perform the Motorized DiSEqC 1.2 menu of the digital receiver.
Refer that menu to
§
4.1.2. After making a new satellite entry
by pressing the OK button on the box, you should configure
LNB settings for it. Refer LNB settings to § 4.1.1.
To delete a satellite entry, choose your desired satellite entry at
the Satellite drop-down list box, and then select the Function
>
Satellite, TP
>
Delete Satellite menu item. Then a box appears
asking for your confirmation, the selected satellite entry will
be deleted by pressing the Yes button on it.
To modify a satellite entry, choose your desired satellite entry
at the Satellite drop-down list box, and then select the Function
>
Satellite, TP
>
Edit Satellite menu item. How to modify is
the same as in adding a new satellite entry.
To add a transponder entry, select the Function
>
Satellite,
TP
>
Add Transponder menu item. Then a box appears, in
which you should specify frequency, symbol rate, polarity and
stream identification for your new transponder. Pressing the
OK button will save a new transponder entry.
To delete a tansponder entry, choose your desired transponder
entry at the TP List list box, and then select the Function
>
Satellite, TP
>
Delete Transponder menu item. Then a box
appears asking for your confirmation, the selected transponder
entry will be deleted by pressing the Yes button on it.
To modify a transponder entry, choose your desired trans-
ponder entry at the TP List list box, and then select the Function
>
Satellite, TP
>
Edit Transponder menu item. How to modify
is the same as in adding a new transponder entry.