Filter
Top Products
2.4 Connecting up yourdigital receiver 13
2.4 Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up
the digital receiver suitably to your television and other ap-
pliances. If you have any problem with your setup or need a
help, contact your dealer.
2.4.1 Connecting to the antenna
Whatever sort of connection you have between the digital re-
ceiver and the television, you need to connect the digital re-
ceiver to your television antenna so that it can receive digital
television services.
Connect a cable from your satellite antenna
to the LNB IN connector on the back panel of
the digital receiver, and connect a cable from
your terrestrial antenna to the ANT connec-
tor.
2.4.2 Connecting to your television
Among the following connectors on your digital receiver, you
should use the first connector to get best video quality. If your
television does not have the matching connector then use the
next connector.
1. SCART connector (TV)
2. S-Video connector (S-VIDEO)
3. Composite connector (VIDEO)
4. RF connector (RF OUT)
You should configure audio and video settings after connect-
ing. See § 3.2 for detailed description.