Filter
Top Products
14 Setup
To use the SCART connector
For best results with a standard television
set, youshould use aSCARTcable, plugging
one end into the TV socket on the digital re-
ceiver and the other end into a free SCART
socket on your television.
Some televisions have inputs via Component or S-Video con-
nectors rather than SCART. If you have such a television, use
an appropriate conversion cable to link the TV socket on the
digital receiver to the matching socket on your television.
If you connect with a standard SCART cable, you do not have
to make audio connections because the SCART connector can
output stereo audio. But if you do with a conversion cable,
such as SCART-to-Component, you have to make audio con-
nections.
To use the S-Video connector
You should prepare a S-Video cable to use
the S-Video connector. Plug one ends of the
cable into the S-VIDEO socket on the digital
receiver, and theother end intothe matching
socket on your television.