Filter
Top Products
4.2 Searching terrestrial broadcastingservices 37
4.2 Searching terrestrial broadcasting services
To perform service search, se-
lect the Installation > Terrestrial
Search menu.
If you have an active antenna, you should set the Antenna
Supply 5V option to on to supply power to the amplifier of
your antenna. The digital receiver will supply the antenna
with 100 milliampere at maximum.
You should set the Search Mode option to Auto at the first ser-
vice search after connectingthe digital receiver. The digital re-
ceiver will search all available services with automatic search
mode. Transponder numbers range from 5 to 12 at VHF and
21 to 69 at UHF.
To search a certain transponder, set the Search Mode option
to Manual, andselect your desired transponder at theChannel
option.
You can search pay services as well as free services. To search
only free services. set the FTA/Scrambled option to FTA only.
FTA means free service. To search only pay services, set it to
CAS only. CAS meanspay service. To search bothfreeservices
and pay services, set it to FTA + CAS.
To start service search, select the Service Search command.
Then appears a list box, in which found services will be listed.
Press the
✄
✂
✁
OK button to save found services when a service
search has been completed. To stop service search on the way