Filter
Top Products
4.1 Searching satellite broadcastingservices 33
5. Finally select the Store command at the Motor Control
menuto savethe tunedpositionwhen thereceivingqual-
ity has turned good.
Therearemoremotor control commandsfor installers,butthis
manual does not describe them. If you are an installer, refer
them to the manual for the STAB rotor.
4.1.3 Configuring USALS settings
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is
no longer required to manually search and store every satel-
lite position. Just by pointing to a known satellite position is
enough. Thisposition will act asthe central point. The USALS
will then calculate positions of visible satellites.
To use USALS, select the Instal-
lation > Satellite Setting > US-
ALS Setting menu.
At first you have to set the Mo-
torized DiSEqC 1.3 option to
Enable.
To calculateeverysatellite position,perform thefollowingsteps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Input yourlocation to the My Longitude andMy Latitude
options with the
✄
✂
✁
V− ,
✄
✂
✁
V+ and numeric buttons.
3. Input the position of your selected satellite to the Satel-