Filter
Top Products
3.5 Adjusting on-screen display 27
3.5 Adjusting on-screen display
You can adjust the transparency level of on-screen display. Se-
lect the System Setting menu and set the OSD Transparency
option as you desire. Its available range is 0 to 50 percent.
You can adjust the display time of the information box. Refer
the information box to § 5.1.2. To adjustits display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you setthis option to No Info Box, the information boxwill not
displayed when you switch services. However, pressing the
button displaysthe information box. If you setthis option
to Never Hide, the information box will always be displayed.
You can raise or lower the position of the information box. Se-
lect the System Setting menu, and then set the Info Box Posi-
tion option as you desire. Its available range is −10 to +3 line.
The more high the value is set, the more low the information
box will be positioned.
3.6 To use the time shift feature
You can use the time shift feature with this digital receiver.
Time shift just means that the most recent hour of the televi-
sion service you are watching is saved on the hard disk of the
digital receiver. To enable this feature, select the System Set-
ting menu and set the Time Shifting option to Enable. For de-
tailed descriptions about the time shift function, refer to § 5.4.
3.7 Setting for MediaHighway EPG
Almost every service provider would provide electronic pro-
gram guide containing detailed program information. You
can getmore abundantprogram informationfrom adedicated
transponder providing only electronic program guides than
general service providers. MediaHighway refers to the ded-