Filter
Top Products
36 Service Search
6. Specify thePIDs of yourdesired service atthe PID menu
with the numeric buttons. PID (Packet Identifier) is a set
of numbers that identifies transport stream packets.
To search every service of a SMATV transponder, if the digi-
tal receiver is connected to a SMATV, perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to SMATV.
3. Choose your desired transponder at the Frequency op-
tion or input it with the numeric buttons.
4. Input thesymbol rate ofyour desiredtransponder to the
Symbol Rate option with the numeric buttons.
5. Setthe Polarization optionto thepolarization of yourde-
sired transponder.
You can search pay services as well as free services. To search
only free services. set the FTA/Scrambled option to FTA only.
FTA means free service. To search only pay services, set it to
CAS only. CAS meanspay service. To search bothfreeservices
and pay services, set it to FTA + CAS.
To start service search, select the Service Search command.
Then appears a list box, in which found services will be listed.
Press the
✄
✂
✁
OK button to save found services when a service
search has been completed. To stop service search on the way
or exit without saving, press the
✄
✂
✁
EXIT button.