Filter
Top Products
10
Quick guide for MENU operation/Selecting the video input source
Make sure the antenna connection
and power supply are connected as
per the description on previous
page.
Preparation:
Turn on the unit with the
(On/
Standby) button on the top of the unit.
The
(On/Standby) indicator will
light up in green.
To change the unit to standby mode,
press
on the remote control.
(On/Standby) indicator will change
from green to red. To turn on the unit
from standby mode, press
on the
remote control again.
In standby mode, you can also turn the
unit on with
(Channel) ▲/▼ on the
unit or P
/ on the remote control.
To turn off the unit press
(On/
Standby) button on the unit - to
completely switch it off, disconnect the
mains power supply.
Quick guide for MENU operation
Notes:
• When you turn on the
unit for the first time,
the Language selection
screen will appear.
Select your desired
language with
or
. Press MENU to
exit the language
selection screen.
• Press 1. CH1 will appear.
Call MENU and for example: Select AUTO TUNING.
1
Press MENU.
2
Press
or to
select
.
3
Press or to
select AUTO
TUNING.
... on the following
pages the MENU
can be called in the
same way as here.
4
Press EXIT to return to the normal screen.
Selecting the video input source
Press INPUT SELECT to
view a signal from
another device
connected to your TV,
such as a VCR or DVD
player. You can select
each input source
depending on which
input jacks you used to
connect your devices.
To select the video input source, press
/ or the
corresponding number button. Then press ENTER within 6
seconds.
Note:
If no buttons are pressed for more than
approx. 60 seconds, the MENU
disappears automatically.
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT FULL
: ENDEXIT
: SELECT : ADJUST
: ENDMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT FULL
: ENDEXIT
: SELECT
: ENDEXIT: SETENTER
LANGUAGE
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
êìëëäàâ
[0-7] : SELECT
SOURCE SELECTION
0.TV
1.AV1
2.AV2
3.AV3
4.COMPONENT
5.HDMI1
6.HDMI2
7.PC
: SETENTER
30E2825A_En_P10-17 1/15/07, 8:26 PM10