Filter
Top Products
25
Scrolling the picture in CINEMA mode
When the CINEMA mode is selected, you can adjust the
vertical picture position.
Note:
You cannot move the picture vertically in any of the other
picture modes.
1
Select
VERTICAL
POSITION.
Then press
.
2
Press or
to adjust the
vertical position of
the picture.
•To raise the
picture, press
.
•To lower the
picture, press
.
Note: You can adjust the vertical position upwards by up
to +20 and downwards by up to -10.
3
Press EXIT to return to the normal screen.
Auto 4:3 Default
This option selects the default way that a 4:3 signal is shown -
either as normal “4:3” or expanded in the “Full screen” mode,
according to your preferences.
1
Select AUTO 4:3
DEFAULT.
Then press
or to select
4:3 or FULL.
2
Press EXIT to return to the normal screen.
Scrolling the picture in CINEMA mode/Auto 4:3 Default
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT 4:3/FULL
: ENDEXIT
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT FULL
: ENDEXIT
SCROLL ADJUSTMENT +10
: SETENTER
: ADJUST
SCROLL ADJUSTMENT –10
: SETENTER
: ADJUST
Notes:
•AUTO 4:3 DEFAULT is available only
for AUTO picture size setting.
• In COMPONENT mode, AUTO 4:3
DEFAULT is available only for
480i/
576i mode.
30E2825A_En_P25-31 1/15/07, 8:27 PM25