Filter
Top Products
20
Using the surround sound feature/
Turning off the built-in speakers
Using the surround sound feature
The SURROUND feature processes the audio signal to expand
the listening field wider and deeper to create a ‘pseudo
surround-sound’ from the TV’s speakers. The feature works
with stereo signals from aeTV broadcast or AV input.
1
Select SURROUND.
Then press or to select ON or OFF.
2
Press EXIT to return to the normal screen.
Turning off the built-in speakers
Use this feature to turn the TV speakers off when you connect
an audio system (see P.33).
When SPEAKERS is set to OFF, the output volume from the
Variable Audio output jacks can be adjusted by the volume
buttons of this unit. If it is set to ON, the output volume from the
Variable Audio output jacks is fixed.
1
Select SPEAKERS.
Then press
or to select OFF.
2
Press EXIT to return to the normal screen.
Notes:
• Make sure the volume control of
your audio amplifier is set to a
moderate listening level.
• The PHONE jack and other output
sockets do not output the
SURROUND audio - this can only be
heard through the TV’s own
speakers.
: SELECT : ADJUST
: RETURNMENU
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND OFF
SPEAKERS ON/OFF
HDMI1 HDMI
HDMI2 HDMI
RESET
: ENDEXIT
: SELECT : ADJUST
: RETURNMENU
NICAM AUTO
BASS 25
TREBLE 25
BALANCE 0
SURROUND ON/OFF
SPEAKERS ON
HDMI1 HDMI
HDMI2 HDMI
RESET
: ENDEXIT
30E2825A_En_P18-24 16/1/07, 12:11 PM20