Filter
Top Products
13
Changing the order of stored channels
1
Select CH ALLOCATION.
Then press
.
2
Press
or until the position number that you want
to move is selected (e.g. CH 40), then press ENTER.
3
Press
or until the channel position that you want to
move the program to is selected (e.g. CH 5), then press
ENTER.
4
The original program 40 is now stored in memory position 5.
To arrange the other channels, repeat this procedure or...
5
Press EXIT to return to the normal screen.
Note:
When changing the order of the
channels, it is best to start with Ch1.
The Automatic station presetting
stores the stations in a specific
order. However, this order can be
changed if you wish.
CH 40
CH ALLOCATION CH 01
: SELECT
: RETURNMENU: SET
ENTER
CH 40
CH ALLOCATION CH 05
: SELECT
: RETURNMENU: SET
ENTER
CH 05
CH ALLOCATION CH 40
: SELECT
: RETURNMENU: SET
ENTER
: SELECT : ADJUST
: RETURNMENU
AUTO TUNING
MANUAL TUNING
CH ALLOCATION
TELETEXT LANGUAGE WEST
LANGUAGE
VERTICAL POSITION
AUTO 4:3 DEFAULT FULL
: ENDEXIT
30E2825A_En_P10-17 1/15/07, 8:26 PM13