Filter
Top Products
16
Basic Operation
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
Press P or to change up or down a channel.
This takes approx. 2 seconds. If the auto search
only stored 5 stations, only these 5 will appear.
Skipped channels will not appear (see P.31).
Channel selection
With the numbered buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
The station stored on CH 2 will appear.
•No. 29: Press 2 and within 2 seconds, press 9.
The station stored on CH 29 will appear.
QuickView
button allows you to go back to the last selected
channel.
Volume adjusting
Press
+ or – to adjust the volume. The volume level
indicator disappears after 4 seconds.
MUTE
Press
. The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing
again or + or –.
Information display
Press
once. Channel
number and wide screen
type will appear. (The
display will disappear after
4 seconds.)
During display above,
press
again. The screen
displays the clock and
program information if this is currently available.
SLEEP TIMER
To set the sleep timer press
. SLEEP and the minutes
until shut-off will appear.
Each time you press
the
SLEEP time shown will
change. When the
displayed time runs out, the
unit will switch to standby.
The display will disappear after approx. 4 seconds
To cancel the sleep timer:
Press
repeatedly until “0” appears.
Still picture
Press FREEZE to make a still picture. To cancel the still
picture, press FREEZE again.
Notes:
• When this function is not available, “NOT AVAILABLE” will
appear.
• The still image automatically goes out after 30 minutes.
30E2825A_En_P10-17 1/15/07, 8:26 PM16