Filter
Top Products
Chapter 3: Using the remote control
21
Learning about the remote control
The buttons used for operating the TV only are
described here. For a complete list of the remote
control’s functions, see the remote control functional
key chart ( page 23).
Note: The error message “NOT AVAILABLE”
may appear if you press a key for a function that
is not available.
1無
POWER turns the TV on and off. When the TV is
on, the green LED indicator on the TV front will be
illuminated.
2無
FREEZE freezes the picture. Press again to restore the
moving picture ( page 41).
3無
SLEEP accesses the sleep timer ( page 50).
4無
PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, 4:3 HD, Native and Dot by Dot
( page 39-40).
5無
Channel Numbers (0–9, –/100) directly tune channels.
The button is used to tune digital channels ( page
38) or to edit the Favorites List ( page 36).
6無
INPUT selects the video input source ( page 34).
7無
CH pq cycles through programmed channels when no
menu is on-screen ( page 30).
8無
VOL + – adjusts the volume level.
9無
FAV BROWSER accesses the Favorites List in the Channel
Brower™ ( page 35).
10無
RECALL displays TV status information ( page 52).
11無
CH RTN returns to the last viewed channel or source
( page 38).
12無
MUTE reduces or turns off the sound ( page 43).
13無
INFO displays TV status information as well as program
details, when available ( page 52).
14無
/ While watching TV, these buttons open
the Channel Browser™ and tune to the previous/next
channel in the channel history ( page 36). (Also see
“Arrow buttons.”)
15無
Arrow buttons (pqtu) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see / .)
16無
ENTER activates highlighted items in the main menu
system.
17無
MENU accesses the main TV menu system ( pages 27
and 28).
18無
EXIT closes on-screen menus.
19無
MODE SELECT switch switches between TV, CABLE/
SAT, AUX 1, and AUX 2 modes ( page 22). Set to “TV”
to control the TV.