Toshiba 37RV525RZ Flat Panel Television User Manual


 
Chapter 6: Using the TV’s features
51
pqtu
Navigate contents menu, etc.
Enters contents menu, etc.
Returns to the previous menu.
Note: These functions depend on the devices
connected.
REGZA-LINK
®
Player Control menu
functions:
1無
Press and open the Preferences menu.
2無
Highlight REGZA-LINK Player Control and press .
3無
Press p or q to select the item you want to
control and press .
Item Description
Power Turns the select device on and off.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Contents
Menu
Accesses the contents list when you press
. At this time, the REGZA-LINK Player
Control menu will disappear.
Note:
•
These functions depend on the devices that are
connected.
•
The REGZA-LINK Player Control item will be
grayed out in the following conditions:
A non-HDMI input is currently selected.
The Enable REGZA-LINK item is set to Off.
The connected CEC device is not a
playback or recording device.
REGZA-LINK
®
input source selection
If a REGZA-LINK device with HDMI switching
capability (e.g. Audio Receiver) is connected to
the HDMI input, you can select another REGZA-
LINK device that is connected to the master HDMI
device using the TV’s INPUT button. See page 34 for
details.
VOLUME and MUTE controls of Audio
Receiver
With your TV’s remote control, you can adjust or
mute the sound volume of the Audio Receiver. First,
set the MODE SELECT switch on the remote control
to TV.
• adjust the volume level.
• turns off the sound.
Note:
To use this function:
Set Speaker Preference to Audio Receiver in
the REGZA-LINK Setup menu.
Confirm that a connected REGZA-LINK device
(such as DVD player, etc) is selected for the
Audio Receiver input source.
You can also use this function when the audio
receiver is connected to the TV’s DIGITAL
AUDIO OUT terminal (not HDMI connection).
In this case, select a digital audio input mode
on the Audio Receiver.
These functions depend on the device
connected.
Other REGZA-LINK
®
functions
When the Enable REGZA-LINK and each item in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
Item Description
TV Auto
Input Switch
If a connected HDMI device starts
playing video or audio, the TV
will automatically switch to the
appropriate HDMI input.
TV Auto
Power
If a REGZA-LINK device is turned
on, the TV turns on automatically.
Device Auto
Standby
If the TV is turned off the TV will
send a message to turn off all of the
REGZA-LINK devices connected to
the TV.
Speaker
Preference
From this item, you can set your
audio output preference to the
TV speakers or the audio receiver
speakers. When this item is set to
Audio Receiver, the TV remote
can be used to adjust or mute the
volume of the audio. This item will
be grayed out unless a REGZA-
LINK compatible audio receiver is
connected.
(continued)