Filter
Top Products
Chapter 5: Setting up your TV
32
To create and assign a custom label:
1無
Open the Channel Labeling window.
2無
Press or to select a channel you want to
label.
3無
Press pqu to highlight Custom and press .
The software keyboard will appear.
4無
Repeatedly press the corresponding key on the
remote control to highlight the desired character
on the on-screen software keyboard.
5無
The highlighted character is entered after you
either press a different key, press u key, or after a
two-second pause.
6無
Repeat steps 4 and 5 until you have entered all
desired text.
7無
When finished, press .
8無
New labels will be added to the list in alphabetical
order and marked with an icon to indicate that
they are custom. Highlight the new custom label
and press to assign.
Assigned channel labels will be displayed in the
banner,
Channel Add/Delete, Channels Block, and
Channel Browser
TM
.
To delete the custom label:
1無
Open the Channel Labeling window.
2無
Highlight the label to be deleted and press .
3無
Highlight Yes from the deletion confirmation
window and press .
4無
Highlight Done and press to save changes,
and go back to the Channel Labeling window.
Setting the HDMI™ audio mode
To set the HDMI audio mode:
1無
Press and open the Audio menu.
2無
Highlight Audio Setup and press .
3無
Press p or q to select HDMI 1 Audio and
then press t or u to select the HDMI 1 audio
mode (Auto, Digital, or Analog). (Auto is the
recommended mode.) See “Connecting an HDMI
or DVI device to the HDMI input” ( page 16).
Mode Description
Auto
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
available, it will be output. If not, the
TV will automatically detect and output
analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input,
digital audio from the HDMI input will
be output.
Analog
When viewing the HDMI 1 input,
analog audio from the PC Audio input
will be output.
4無
To save your settings, highlight Done and press
.
Note: Because the PC and HDMI-1 inputs
share the same set of analog audio inputs, the
PC Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No,”
the HDMI 1 Audio setting changes to “Auto.”
If PC Audio is set to “Yes,” the HDMI 1 Audio
setting is set to “Digital” and is grayed out in
the menu. (Also see item 7 on page 12 and
“Setting the PC Audio” on page 49.)