Filter
Top Products
49
Setting up your TV
Setting channel skip
2 Press the ( / arrow) buttons to select Channel Options, and
then press the ENTER button.
The list of channels appears.
(Sample Illustration) List of channels
3 Press the ( / arrow) buttons to select a channel position to
be skipped, and then press the ENTER button.
A check will appear in the box. To remove the check, press the
ENTER button again.
To add a channel to the channel memory:
❖ Highlight the checked box next to the channel number you
wish to add, and then press the ENTER button to remove the
check.
You can also block specific channels so that they cannot be tuned
until you unlock them. For information, see “Locking channels” on
page 87
To manually add digital sub-channels on a physical channel:
❖ Use the Channel Number buttons and the Dash (100) on the
remote control to enter the channel number (for example,
56–1).
If the channel is found, the number will be added to the list and
the box will be unchecked. If the channel is not found, a
message appears.
Skipped channels cannot be selected with the CH Up/Down buttons;
however, they can be accessed using the number buttons on the
remote control.
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.
NOTE
NOTE