Filter
Top Products
6
5.375 x 8.375 ver 2.3
7)
VESA Mounting Pattern
Removing the Pedestal Stand
1)
Carefully lay the front of the unit face down on a
flat, cushioned surface such as a quilt or blanket.
Leave the stand protruding over the edge of the
surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2)
Remove the four screws shown in the below
diagram. This will allow removal of the pedestal
stand.
3)
Once you have removed all four screws holding
the pedestal stand in place, remove the pedestal
stand from the TV.
32” TV
40” TV
CAUTION: Always place the TV on the floor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
pillar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the floor.
TV Size Hole Pattern (HxV) Screw Size
32” 200x200 mm M6
40” 200x200 mm M6
(unit in mm)