Filter
Top Products
99
Using the TV’s features
Setting the sleep timer
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1 Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
2 Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the ( / arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1 Press the MENU button and open the Setup menu.
2 Highlight Sleep Timer and press the ENTER button.
3 Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press ENTER.
Or press the ( arrow) buttons to increase or decrease in 10-
minute increments (maximum of 12 hours).
If a power failure occurs, the sleep timer setting may be cleared.
To display the time remaining until the TV turns off, press the
SLEEP button.
A message will display on-screen when there is one minute
remaining on the sleep timer.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
Auto Brightness Sensor
When the Auto Brightness Sensor Setting is set to On, the
television optimizes the backlighting levels to suit ambient light
conditions.
To turn on Auto Brightness:
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the ( / arrow) buttons to select Auto Brightness
Sensor.
NOTE
NOTE