Filter
Top Products
1
2
3
Select DTV Manual Tuning from the SETUP
menu and press OK.
Enter the multiplex number using the number
buttons or use
S
or
R
to adjust the number and
then press OK. The television will automatically
search for that multiplex.
When the multiplex is found any channels not
currently on the programme list will be added
and the programme information at the top of the
screen will be updated.
Repeat as necessary. Press EXIT to finish.
This feature is available for service engineers or can be
used for direct channel entry if the multiplex channel
is known.
12
NOTE: As new services are broadcast it will be necessary to re-tune the television in order to view them.
DTV auto tuning, auto programme update,
manual tuning, analogue switch off
Use
S
or
R
to select DTV then press OK to
continue with the Auto tuning.
The television will start to search for all available
DTV stations.
You must allow the television to complete
the search.
When the search is complete the Auto Tuning
screen will display the services found.
Use Q or P to move through the list to select a
programme then press OK to view.
Auto Tuning
1
Press MENU and use
S
or
R
to select SETUP.
Use Q to highlight Auto Tuning. Press OK.
A screen will appear warning that previous
digital programmes and settings will be deleted.
2
3
Auto tuning will completely re-tune the television and can
be used to up date the channel list.
It is recommended that Auto tuning is run
periodically to ensure that all new services are
added. All current programmes and settings, i.e.
favourites and locked programmes, will be lost.
Auto Programme Update
Manual Tuning
1
2
3
Press MENU and use
S
or
R
to select SETUP.
Use Q to highlight DTV Settings and press OK.
Press Q to select Auto Programme Update
and use
S
or
R
to select On.
If Auto Programme Update is set to On when the
television is in standby mode Digital Tuning will
automatically execute and new programmes will be stored.
This is a digital television which is integrated to allow the
use of both digital and analogue services. However,
during the lifetime of this set it is very likely that
analogue services will be switched off to allow for more
new digital services.
This ‘switch-off’ will happen in a number of phases, which
will be advertised in your area well in advance. It is
recommended that at each phase the television is
re-tuned to ensure that existing and new digital services
can be viewed without disruption.
Analogue Switch-off
SETUP 1/2
Language English
Country UK
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Manual Setting
AV Connection
Auto Tuning
Previous settings will be lost! Press
EXIT for no change. Press OK to start
Auto tune.
ATV and DTV
gpg